manualshive.com logo in svg

Panasonic DLP PT-FRZ50, Operating Instructions Manual

Share
Download
Panasonic DLP PT-FRZ50 Operating Instructions Manual Download Page 154

Chapter 5 

 

Operations — Updating the firmware

154 - ENGLISH

File name (example): FirmUpdateTool_FRZ50_101.exe

2)  Double-click the executable file generated by extracting.

 

f

The update tool is started up, and the confirmation screen is displayed.

PT-FRZ60 / FRZ50 / FRZ55

3)  Confirm the status of the projector.

 

f

Confirm that the projector to be updated is in the standby mode.

4)  Confirm the connection status.

 

f

Confirm that the projector to be updated and the computer to be used for update are correctly connected 

via LAN.

5)  Click [Next].

 

f

The license agreement screen is displayed.

 

f

Confirm the content of the license agreement.

 

f

The update tool will end by clicking [Close].

6)  Select [I accept].

Summary of Contents for DLP PT-FRZ50



























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands