Panasonic DLP PT-FRZ50, Operating Instructions Manual

Page: 136 / 186

Chapter 5 Operations — Web control function
136 - ENGLISH
13
16
17
6
9
7
8
1
2
3
4
5
10
11
12
15
14
1 [PROJECTOR TYPE]
Displays the type of the projector.
2 [MAIN VERSION]
Displays the firmware version of the projector.
3 [POWER]
Displays the status of the power.
4 [SHUTTER]
Displays the status of the shutter function ([CLOSE]: Enabled
(closed), [OPEN]: Disabled (open)).
5 [OPERATING MODE]
Displays the setting status of [OPERATING MODE].
6 [SERIAL NUMBER]
Displays the serial number of the projector.
7 [OSD]
Displays the status of the on-screen display.
8 [VOLUME]
Display the volume status.
9 [LIGHT OUTPUT]
Displays the setting status of [LIGHT OUTPUT].
10 [INPUT]
Displays the status of the selected input.
11 [INTAKE AIR TEMPERATURE]
Displays the status of the intake air temperature of the projector.
12 [OPTICS MODULE TEMPERATURE]
Displays the status of the internal temperature of the projector.
13 [EXHAUST AIR TEMPERATURE]
Displays the status of the exhaust air temperature of the projector.
14 [LIGHT TEMPERATURE1], [LIGHT TEMPERATURE2]
Displays the temperature status of the light source.
15 [LIGHT]
Displays the lighting status and runtime of the light source.
16 [SELF TEST]
Displays the self-diagnosis information.
17 [PROJECTOR RUNTIME]
Displays the runtime of the projector.
Error information page
When [Error (Detail)] or [Warning (Detail)] is displayed in the [SELF TEST] display field of the [Projector status]
screen, click it to display the content of the error/warning.
f
The projector may go into the standby status to protect the projector depending on the contents of the error.
1
2
1 Display of error information
Displays the alphanumeric symbols and content of errors/
warnings that occur.
Refer to “[SELF TEST] indications” (
x
page 163) for the display
details.
2 Error code
[Network status] page
Click [Status]
→
[Network status].
The current network setting status is displayed.