G
etting
sta
rte
d
VQT2J59
15
About HDMI cable
≥
Please use High Speed HDMI Cables that have the HDMI
logo (as shown on the cover).
≥
When outputting 1080p signal, please use HDMI Cables
5.0 meters or less.
≥
Recommended Panasonic HDMI cable part number:
RP-CDHS15 (1.5 m), RP-CDHS30 (3.0 m), RP-CDHS50
(5.0 m), etc.
≥
You cannot connect this unit to DVI devices that are incompatible with
HDCP.
Depending on the device, images may not display properly or at all
when connecting with a DVI/HDMI switching cable. (Audio cannot be
output.)
≥
If you are connecting to a TV that is only compatible with 2 channel
audio output, audio with 3 channels or more will be down mixed (
>
107)
and output as 2 channels, even if connecting with an HDMI cable.
(Some discs cannot be down mixed.)
When the unit is not to be used for a long time
To save power, unplug it from the household mains socket.
This unit consumes a small amount of power, even when it
is turned off
[approx. 0.25 W (“Power Save in Standby” is activated)]
Connect the Set Top Box or VCR
Connect the unit directly to the TV
If you connect the unit through an AV
selector or VCR to the TV, video signal
will be affected by copy protection
systems and the picture may not be
shown correctly.
≥
When connecting to a TV with a
built-in VCR
Connect to the input terminals on the
TV side if there are both TV and VCR
input terminals.
AV1
(TV)
VIDEO
RGB/S VIDEO
AV2
(EXT)
VIDEO
RGB/S VIDEO
AV
This unit’s rear panel
Set Top Box or VCR
21-pin Scart cable
TV
VCR
This unit
DO NOT
DMRXS385EG-VQT2J59_eng.book 15 ページ 2010年8月3日 火曜日 午前11時21分