G
etting
sta
rte
d
VQT2J59
21
After completing “Easy Setting”, you can continue with
“Network Easy Settings”.
Follow the on-screen instructions and make
the following settings.
≥
Network connection test
≥
Home Network ( DLNA ) function setting
≥
Internet connection test
When TV picture appears, Setup is complete.
∫
When you experience problems with
settings
≥
Network Easy Settings ( Connection Test )
≥
Network Easy Settings ( Internet Connection Test )
To stop partway
Press [RETURN
].
To restart Network Easy Settings
1 While stopped
Press [FUNCTION MENU].
2 Select “Setup” in “Others”, then press [OK].
3 Select “Network Easy Settings” in “Network”, then press
[OK].
To redo settings individually
1 While stopped
Press [FUNCTION MENU].
2 Select “Setup” in “Others”, then press [OK].
3 Select “Network Settings” in “Network”, then press [OK].
4 Select “IP Address / DNS Settings” (
>
83) or “Proxy
Server Settings” (
>
83), then press [OK].
Check security before using Home Network ( DLNA )
function
If you set “Home Network ( DLNA ) function” to “On”, all
connected devices on the same network can access this
unit. Ensure that the router for your home network has
adequate security system to prevent unauthorized access.
≥
Refer to the operating instructions of the hub or router.
≥
Home Network ( DLNA ) function setting can be set only when you
selected “Off” for “Power Save in Standby” in “Easy Setting”. (
>
20,
step 4)
≥
Even if you set “Home Network ( DLNA ) function” to “Off”, it is possible
to set to “On” later. (
>
69)
Network Easy Settings
Display
Check the
following
1. LAN cable
connection:
“Fail”
≥
Connection of
the LAN cables
(
>
16)
2. IP address
setting:
“Fail”
3. Connection to
gateway:
“Fail”
1. LAN cable
connection:
“Pass”
≥
Connection and
settings of the
hub and router
≥
Settings of “IP
Address / DNS
Settings” (
>
83)
2. IP address
setting:
“Fail” or “Home
network
available”
3. Connection to
gateway:
“Fail”
1. LAN cable
connection:
“Pass”
2. IP address
setting:
“Pass”
3. Connection to
gateway:
“Fail”
OK
RETURN
Network Easy Settings
LAN setup and testing of home network and
internet connections are required for internet
functions. Broadband Internet connection is
necessary for network features.
Please confirm that a LAN cable is connected.
Please refer to the operating instructions.
Press OK to start Network Easy Settings.
Display
Check the following
Cannot find the
server. (B019)
≥
Network connections and
settings
≥
Settings of “IP Address / DNS
Settings” (
>
83)
No connection could
be made to the
server. (B020)
≥
The server may be busy or the
service may have been
suspended. Please wait a few
moments, and then try again.
≥
Settings of “Proxy Server
Settings” (
>
83)
DMRXS385EG-VQT2J59_eng.book 21 ページ ２０１０年８月３日 火曜日 午前１１時２１分
