Connector Point
Video input terminal 1 (VTR1-IN)
Connects a VCR, camcorder, rear view
camera, other brand’s car navigation
system, and so on. (
a
page 46)
Video input terminal 2 (VTR2-IN)
Connects a VCR, camcorder, rear view
camera, other brand’s car navigation
system, and so on. (
a
page 46)
Video output terminal
Connects the second
monitor. (
a
page 44)
Panasonic
(Black)
(Black / green stripe)
Speaker
(supplied to
CY-VMC7000U)
Remote Control Signal
Receiver Cord
To the REMOTE-IN terminal
or Remote Control Signal
Receiver Cord of the
Panasonic DVD video player
CY-VMC7000U
Control Unit (Rear)
CY-VMC7000U
Control Unit
(Front)
Leave the cover
unremoved if you do not
connect the AV Control
Unit (CA-TU7000U)
Connect AV control unit with
receiver (CA-TU7000U).
Cautions:
¡
Ask a qualified service person for installation and wiring.
The installation and wiring of this unit requires special skills and experience. For safety, ask the store where you pur-
chased it to perform installation and wiring.
¡
Do Not Disassemble or Modify.
Do not disassemble or modify the unit. Do not remove the coverings from the ends of cables and wires to provide
power for other devices. Because it may generate smoke or fire, and cause electric shock or trouble.
43
CY-VMC7000U
34
E
N
G
L
I
S
H
Notes:
¡
Be sure to fully plug in the connector.
¡
Install the cord to avoid high-temperature sports and secure with clamps and tape.
¡
When game devices are connected, the image may be unstable.
¡
When removing the DIN plug, be sure to press the clip.
