2
E
N
G
L
I
S
H
CY-VMC7000U
ID Code
Prior to operating this unit, it is a advisable to assign your 4-digit ID code for security. (Make sure to use
four digits
for ID
code. ID code can not be set with two or three digits.)
Once the ID code has been set, the unit cannot be operated if the main power supply is disconnected then re-connected. It
is electronically locked so that a thief could not use the stolen unit unless that person knows the code you have set.
The ID code operation must be performed only by the person whom the unit belongs to.
Generally, it is not necessary to enter the ID code each time when using the unit if it has never been disconnected from the
main power supply (car battery). For the ID code setting procedures, see pages 28 to 29.
ID Code Input
Enter the ID code after turning on the power and activating the display.
Note:
When failing in entering ID code, a screen on the right is displayed, and the
unit beeps three times. Enter a correct ID code.
In case of failing in entering ID code three times consecutively, the power is turned
off. Turn on the power again and enter a correct ID code in this case.
Caution:
Record your registered ID code and keep it in a secure location. If you forget it, you will be unable
to use the unit. In case that you can not operate the unit because of forgetting the ID code, please consult your nearest
Panasonic Servicenter.
¡
Picture might not be displayed, or it might take more time than usual to display picture in low temperature.
Also, movement of picture might become labored, or picture quality might become deteriorate in low tempera-
ture. (practicable temperature: 0 °C - 40 °C)
¡
Do not touch the LCD (liquid crystal display).
If you touch the LCD, your fingerprints will be conspicuous because the surface of the LCD was specially
processed.
¡
In some cases, noise is generated. It depends on the position or direction of a cellular phone.
Change the position or direction of the cellular phone, or keep it away from the unit.
Cautions
This system is designed so that you can not see pic-
ture from VCR, DVD player, and other devices while
you are driving.
¡
Park your car in a safe place and engage the parking brake lever
before watching the monitor.
¡
Picture can be seen on the second monitor.
11
Note:
Be sure to connect the parking brake connection lead. (
a
page 46)
Success
