40
CY-VMC7000U
31
E
N
G
L
I
S
H
Mounting Example
Stick Velcro Tape
!5
on the carpet and
mount the control unit on it.
Notes:
¡
Never mount the control unit in any of the following locations to avoid damage due to overheating:
1. Near the heater port.
2. Places like the dashboard or rear deck, where it may be exposed to direct sunlight.
¡
Do not mount the control unit near the door, where it could be exposed to rain.
Control Unit
!5
Velcro Tape
Carpet
Note:
Some carpet materials may not be suit-
able for this mounting method. In this case,
please contact your nearest Panasonic
Servicenter for installation.
Mounting the Control Unit
Installation Guide
(continued)
Use the supplied Spacer
!3
if mounting hole of your car is shaped like below.
Display Unit
!3
Spacer
!4
Double-Faced Adhesive Tape
!0
Binding-Head Screw
(M5 x 6 mm)
Not used
Bracket
Mounting Hole of
a Bracket
(in section)
Existing Bracket (R)
(Bracket originally
attached to the car)
!4
Double-Faced
Adhesive Tape
Existing Bracket (L)
!0
Binding-Head Screw
(M5 x 6 mm)
!3
Spacer
