manualshive.com logo in svg

Panasonic CS-A12KKD-2, Service Manual

Share
Download
Panasonic CS-A12KKD-2 Service Manual Download Page 79

79 

•

 

During ECO Patrol operation, the internal setting temperature and fan speed are adjusted in order to provide 
comfort and energy saving. 

 

•

 

ECO Patrol Start condition.  

ƒ

 

Press ECO Patrol button to select ECO1 and ECO2. 

 

•

 

ECO Patrol Stop condition.  

ƒ

 

Press ECO Patrol button again. 

ƒ

 

OFF Timer activates. 

ƒ

 

Press OFF/ON button to turn off the air conditioner. 

ƒ

 

Press AUTO OFF/ON button to turn off the air conditioner. 

ƒ

 

Press POWERFUL/QUIET button. 

ƒ

 

Press Mild Dry Cooling button. 

 

•

 

ECO Patrol operation could ON when any of the following conditions is fulfilled:  

ƒ

 

During forced cooling or forced heating operation. 

ƒ

 

During e-ion or individual patrol operation.  

 

•

 

Power Failure  

ƒ

 

ECO Patrol operation will be resuming after recovered from power failure.  

 

•

 

Timer Operation  

ƒ

 

When unit is turn on by ON Timer and ECO Patrol operation is ON during previous operation before OFF, 
ECO Patrol operation will not be ON automatically. 

ƒ

 

When unit is turn on by ON Timer and ECO Patrol operation is OFF during previous operation before 
OFF, ECO Patrol operation will not be ON automatically. 

 

•

 

Other Information  

ƒ

 

ECO Patrol, Powerful, Quiet and Mild Dry Cooling cannot be operated at the same time. 

ƒ

 

ECO Patrol sensor initialized time is 70 seconds from power supplied to ECO Patrol sensor, or 70 
seconds from the operation start. 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Summary of Contents for CS-A12KKD-2









































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands