Panasonic CS-A12KKD-2, Service Manual

Page: 56 / 136

56
•
Operation mode will be determine again for judgement after 1 hour of operation, if the room temperature reaches
to set temperature and compressor off time is over 7 minutes 30 seconds continuously.
* The present operation mode will be continued, if the room temperature does not reach to set temperature
(Compressor keeps running) eventhough after 1 hour from automatic operation mode started.
Standard for Determining Operation Mode
2nd Judgement onwards
Next Mode
Present Mode Judgement
Cooling Soft Dry Heating
Cooling
23°C
Heating
Cooling
O
(Judgement:
23°C & Above)
Not Applicable
O
(Judgement:
Below 23°C)
Soft Dry
20°C
Heating
Soft Dry Not Applicable
O
(Judgement:
20°C & Above)
O
(Judgement:
Below 20°C)
Cooling
25°C
Heating
Heating
O
(Judgement:
25°C & Above)
Not Applicable
O
(Judgement:
Below 25°C)
•
Automatic Set Temperature
For each operation, set temperature will automatically set as shown below.
•
The setting temperature for all the operations can be changed one level up or one level down from the standard
temperature as shown in below table by pressing on the temperature up or temperature down button at remote
control.
Hi (Standard) Lo
Operation
(+2°C) (±0°C) (-2°C)
Cooling 27°C 25°C 23°C
Soft Dry 24°C 22°C 20°C
Heating 23°C 21°C 19°C
•
The operation mode judging temperature and standard setting temperature can be increased by 2°C
permanently, by open the circuit of JX03 at indoor unit’s printed circuit board.