33
Item
Note
Sharpness
The value here is to adjust the edge of the video. The value ranges
from 0 to 100. The larger the value is, the clear the edge is and vice
versa. Please note there is noise if the value here is too high. The
default value is 50 and the recommended value ranges from 40 to 60.
Chroma
It is to adjust monitor video brightness and darkness level. The default
value is 50.
The bigger the value is, the large the contrast between the bright and
dark section is and vice versa.
Brightness
It is to adjust monitor window bright. The value ranges from 0 to 100.
The default value is 50.
The larger the number, the bright the video is. When you input the
value here, the bright section and the dark section of the video will be
adjusted accordingly. You can use this function when the whole
video is too dark or too bright. Please note the video may become
hazy if the value is too high. The recommended value ranges from 40
to 60.
Contrast
It is to adjust monitor window contrast. The value ranges from 0 to
100. The default value is 50.
The larger the number, the higher the contrast is. You can use this
function when the whole video bright is OK but the contrast is not
proper. Please note the video may become hazy if the value is too
low. If this value is too high, the dark section may lack brightness
while the bright section may over exposure .The recommended value
ranges from 40 to 60.
Saturation
It is to adjust monitor window saturation. The value ranges from 0 to
100. The default value is 50.
The larger the number, the strong the color is. This value has no
effect on the general brightness of the whole video. The video color
may become too strong if the value is too high. For the grey part of
the video, the distortion may occur if the white balance is not
accurate. Please note the video may not be attractive if the value is
too low. The recommended value ranges from 40 to 60.
Color mode
It includes several modes such as standard, soft, bright, colorful,
bank. Select a color mode, the sharpness, brightness, contrast and
etc can automatically switch to corresponding setup.
Adjust Equalizer
Click reset button, system can auto adjust the video to the best effect.
Position
It is to adjust the image position on the screen. The value here refers
to the pixel. The default pixel value is 8.
Summary of Contents for CJ-HDR216
