161
Parameter
Function
Enable
You need to select the checkbox to enable this function.
Please select a channel from the dropdown list.
Period
This function becomes activated in the specified periods.
There are six periods in one day. Please draw a circle to
enable corresponding period.
Select date. If you do not select, current setup applies to
today only. You can select all week column to apply to the
whole week.
Click OK button, system goes back to local alarm
interface, please click save button to exit.
Anti-dither
System only memorizes one event during the anti-dither
period. The value ranges from 5s to 600s.
Type
There are two options: NO/NC.
Record channel
System auto activates motion detection channel(s) to
record once an alarm occurs. Please note you need to set
alarm record period and go to Storage-> Schedule to set
current channel as schedule record.
Delay
System can delay the record for specified time after alarm
ended. The value ranges from 10s to 300s.
Alarm out
Enable alarm activation function. You need to select alarm
output port so that system can activate corresponding
alarm device when an alarm occurs.
Latch
System can delay the alarm output for specified time after
an alarm ended. The value ranges from 1s to 300s.
PTZ Activation
Here you can set PTZ movement when alarm occurs.
Such as go to preset X.
Tour
You need to select the checkbox here to enable this
function. System begins 1-wiindow or multiple-window tour
display among the channel(s) you set to record when an
alarm occurs.
Screenshot
Click setup button to select snapshot channel.
Show message
System can pop up a message to alarm you in the local
host screen if you enabled this function.
Send Email
If you enabled this function, System can send out an email
to alert you when an alarm occurs.
Alarm upload
System can upload the alarm signal to the center
(Including alarm center).
Buzzer
Select the checkbox here to enable this function. The
buzzer beeps when an alarm occurs.
5.8.3.3 Abnormality
It includes two types: HDD error and Network error. See Figure
Summary of Contents for CJ-HDR216
