163
Parameter Function
Latch
The alarm output can delay for the specified time after an alarm stops.
The value ranges from 1s to 300s.
Show
message
System can pop up a message to alarm you in the local host screen if
you enabled this function.
Send
Email
If you enabled this function, System can send out an email to alert you
when an alarm occurs.
Alarm
upload
System can upload the alarm signal to the center (Including alarm
center.
Buzzer
Select the checkbox here to enable this function. The buzzer beeps
when an alarm occurs.
5.8.3.4 Alarm Output
It is to set alarm output mode. See Figure
Figure
5-55
5.8.4 Storage
5.8.4.1 Schedule
5.8.4.1.1 Schedule
In this interfaces, you can add or remove the schedule record setup. See Figure
There are four record modes: regular, motion detect, alarm and MD & alarm. There are six
periods in one day.
You can view the current time period setup from the color bar.
Green color stands for the regular record/snapshot.
Yellow color stands for the motion detect record/snapshot.
Red color stands for the alarm record/snapshot.
Summary of Contents for CJ-HDR216
