manualshive.com logo in svg

Panasonic CF-W4 Series, Reference Manual

Share
Download
Panasonic CF-W4 Series Reference Manual Download Page 120

120

USB Devices (External Mouse etc.)

z

The procedure may depend on the external mouse driver you are using. For 
more information, refer to the instructions manual provided with the mouse 
driver.

2

After the driver is removed, shut down Windows and turn off the 
computer.

z

If an external mouse is connected, disconnect it after turning off the computer.

3

Turn on the computer and start Windows.

4

Click [start] - [Run] and input [c:\util\drivers\mouse\setup.exe] and 
then click [OK].

z

Follow the on-screen instructions.

z

At [Setup complete], confirm that [Yes, I want to restart my computer now] is 
selected and click [Finish].

5

After restarting the computer, at [Synaptics Pointing Device Settings], 
remove the checkmark from [Show this screen at startup] and click 
[Close].

6

Click [start] - [Run] and input [c:\util\touchpad\setup.exe], and then 
click [OK].

z

Follow the on-screen instructions.

z

After completing the installation, if the message [Touch Pad function and original 
Flat Pad scroll function cannot be used simultaneously] is displayed, click [Yes].

Summary of Contents for CF-W4 Series













































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands