background image

102

SD Memory Card Security Function

For the SD memory card security function, you can configure and insert an SD memory card 
instead of entering a password for following cases.

z

Use when starting the computer:

 

Set the Supervisor Password in the Setup Utility (

Î

page 53

). You can also set it during 

the configuration procedure.

z

Use when logging on to Windows (Resuming from the standby or hibernation 
mode, or the screensaver):

The Windows log on user and password must be set in [Control Panel] in advance. For 
information on how to set the user and the password, refer to the Windows Help.

CAUTION

z

When handling an SD memory card with the security function configured

• Be careful not to lose the card.
• When stepping away from the computer, do not leave the card in the slot.

NOTE

z

Use the formatted SD memory card. (

Î

page 98

)

z

This security function only works in the SD memory card slot. It does not work in 
devices such as an SD card reader/writer connected through a USB connection or PC 
Card connection.

z

When power on the computer

z

When logging on to Windows/
resuming from the standby or 
hibernation mode, or the screensaver

Windows log on screen

Set the SD memory card

Set the SD memory card

Windows log on screen appears

Windows desktop appears

Summary of Contents for CF-W4 Series













































































































































































































Reviews: