71
Setup Utility
z
You can select the boot device during start-up of the computer, too. Press
Esc
soon after [Panasonic] boot screen is
displayed. [Boot Menu] appears and you can select the device. [Boot Menu] appears only when [Boot First Menu] in
the [Security] menu is set to [Enable] (
). When you change the setting in the [Boot] menu, [Boot Menu] will
be changed accordingly.
Exit Menu
Save Values & Exit
To save the changes to CMOS and reboot.
Exit Without Saving Changes
To exit without saving the changes to CMOS.
Get Default Values
To return the settings to the default values.
Load Previous Values
To load the previous values from CMOS.
Save Current Values
To save the changes to CMOS.
Repair Your Computer
To start System Recovery Options and run system
diagnostics and restoration.
This does not appear when the computer is turned on
for the first time after purchase (Windows has never
been started up), or when Hard Disk Erase Utility has
been executed.
Diagnostic Utility
The PC-Diagnostic Utility starts up, and it will auto-
matically begin the diagnostic check for all hardware
components. (
⇒
Operating Instructions
“Hardware
Diagnostics”)
