![background image](http://html.mh-extra.com/html/panasonic/cf-t7-series/cf-t7-series_reference-manual_264424054.webp)
54
LAN
CAUTION
z
To ensure proper network operations, use a twisted pair cable (category 5 or higher) less than 100 m in length.
z
Do not use the sleep or hibernation during communications (except when the Wake up from wired LAN function is in
use), as this may cause an error in data transmission or reception. The timeout function may engage even during data
transmissions, causing the computer to automatically go into sleep or hibernation. When not using the Wake up from
wired LAN function, we recommend setting [Never] for [Put the computer to sleep:] and [Hibernate after]. (
)
1
Turn off your computer.
z
Do not use sleep or hibernation.
2
Connect the cable.
Connect the LAN port (A) and the network system (server, HUB, etc.) using a
LAN cable.
3
Turn on the computer.
NOTE
z
Even when a password is set in the Setup Utility and [Password on boot] is set to [Enable], entering the password is
unnecessary for turning on or resuming the computer.
z
Connect the AC adaptor.
z
The Power On by LAN function is off under the following conditions:
• When you turn the computer off by sliding the power switch for four seconds or longer (e.g., after a hung-up).
• When you reattach the AC adaptor and battery pack to the computer after removing them.
z
The screen remains dark after the computer resumes from sleep. The previous screen display will be restored when
you touch the keyboard or touch pad, touchscreen (only for model with touchscreen).
Power On by LAN/Wake Up from Wired LAN