Panasonic CF-H2 series Operating Instructions Manual Download Page 24

Page: 24 / 40

Useful Information

Maintenance

To clean the LCD panel

If drops of water or other stains get on the surface of the LCD panel, wipe them off immediately. Failure to do so may

result in staining.

Use the soft cloth included with the computer. (For further information, refer to “Suggestions About Cleaning the LCD
Surface” (

Reference Manual

“Screen Input Operation”).

To clean areas other than the LCD panel

Wipe with a soft dry cloth such as gauze. When using detergent, dip a soft cloth in water-diluted detergent and wring it

thoroughly. Do not use rubbing alcohol.

Wipe with a soft dry cloth such as gauze. If needed, use alcohol cleaning agent to clean the computer. When using

detergent, dip a soft cloth in water-diluted detergent and wring it thoroughly.

CAUTION

Do not use ester contained agent, strong alkaline agent, benzene or thinner since it may adversely affect the

surface causing discoloration, etc. Do not use commercially-available household cleaners and cosmetics, as they

may contain components harmful to the surface.

Do not apply water or detergent directly to the computer, since liquid may enter inside of the computer and cause

malfunction or damage.

Handling and Maintenance

CPE02747ZA_CF-H2mk3_EU_OI_M.indb 24

2013/07/24 13:13:19

Summary of Contents for CF-H2 series









































Search results

Summary of Contents for CF-H2 series

Reviews:

Related manuals for CF-H2 series

Brands by name

Popular brands

Panasonic CF-H2 series, Operating Instructions Manual

Search results

Summary of Contents for CF-H2 series

Reviews:

Related manuals for CF-H2 series

Brands by name

Popular brands