Panasonic AW-UE80KP Operating Instructions Manual Download Page 18

Page: 18 / 72

Installation Instructions

Check the mounting.

Connect the rear panel connectors.

<NOTE>

•

Do not connect PoE cable to the RS-422 port.

•

For details on recommended products, refer to the catalog or consult your local dealer.

•

Always disconnect the power supply before connecting or disconnecting cables.

Connecting or disconnecting cables while the power is turned on may result in malfunctions.

Coaxial cable

HDMI cable

AC adaptor cable

LAN cable

How to secure the AC

adaptor cable

Loosely secure the cable clamp.

Cable clamp

Loosely secure the cable clamp

in the area shown above.

Fasten the cable clamp.

Strap part

Take hold of the strap part, slide

the cable clamp until it stops

moving, and then secure it tightly.

Stand-alone installation (when the mount bracket is going to be used) (continued)

Summary of Contents for AW-UE80KP









































































Search results

Summary of Contents for AW-UE80KP

Reviews:

Related manuals for AW-UE80KP

Brands by name

Popular brands

Panasonic AW-UE80KP, Operating Instructions Manual

Search results

Summary of Contents for AW-UE80KP

Reviews:

Related manuals for AW-UE80KP

Brands by name

Popular brands