36 (G)
DEUTSCH
Grundlegende Operationen
w
w
Steuerung über das Kamera-Fernsteuergerät AW-RP50
POWER
ALARM
F1
CAMERA
OSD
R/B GAIN
R/B PED
SYSTEM
SETUP
CAMERA
SCENE/MODE
DETAIL
DELETE
STORE
PAGE
MENU
F2
EXIT
USER2
USER1
PT ACTIVE
AUTO
IRIS
AUTO
HI
LOW
PTZ/FOCUS SPEED
FOCUS/PUSH OAF
TELE
ZOOM
WIDE
CAMERA STATUS / SELECTION
PRESET MEMORY / MENU
GAIN/PED
F2
F1
1
2
3
AWB/ABB
4
SHUTTER
5
1
2
3
4
5
6
7
8
9
10
Benutzen Sie diese Tasten
zur Durchführung der
Kameramenüoperationen.
CAMERA OSD:
Wird diese Taste 2 Sekunden lang
gedrückt, so wird das ausgewählte
Kameramenü in das Kamera-
Ausgabebild eingeblendet.
Wird sie während der Anzeige eines
Kameramenüs für 2 Sekunden
gedrückt, so wird das Menü
ausgeblendet.
F1: Drehen Sie [F1], um den Cursor im
Kameramenü nach oben oder unten
zu bewegen oder die Einstellung zu
ändern.
Drücken Sie den Knopf, um zum Menü
auf der nächsttieferen hierarchischen
Ebene zu gehen oder eine Einstellung
auf der untersten hierarchischen Ebene
zu ändern.
Zur Wahl der zu bedienenden Kameras.
w
q
Verfahren für Kameramenüoperationen (AW-RP50)
1
Drücken Sie eine der Tasten [CAMERA
STATUS/SELECTION], um das zu bedienende
Gerät auszuwählen.
2
Drücken Sie die Taste [CAMERA OSD] des
Steuergerätes AW-RP50 für 2 Sekunden.
Das Kameramenü des Modells AW-HE50 wird auf dem
Monitor angezeigt.
3
Drehen Sie den Knopf [F1], um den AW-HE50
Menüposten auszuwählen oder die Daten zu
ändern.
Drehen Sie den Knopf [F1], um den Cursor nach oben
oder unten zu bewegen oder die Einstellung zu ändern.
Drücken Sie den Knopf, um zum Menü auf der
nächsttieferen hierarchischen Ebene zu gehen
oder eine blinkende Einstellung auf der untersten
hierarchischen Ebene zu ändern.
4
Drücken Sie die Taste [CAMERA OSD]
für 2 Sekunden, um das Kameramenü zu
verlassen.