manualshive.com logo in svg

Panasonic AV-HS450, Operating Instructions Manual

The Panasonic AV-HS450 is a cutting-edge video switcher offering professional-grade features. Unlock the full potential of your device by accessing its Operating Instructions Manual, available to download for free. Visit manualshive.com to obtain this comprehensive manual and explore the key functionalities of your Panasonic AV-HS450.

Share
Download
background image

14

1. Installation

1-3.  How to install the option boards

The option boards are installed in the mainframe.
For details, refer to the operating instructions of the option board concerned.

 

Be absolutely sure to ask your dealer to do the job of installing or removing the option boards.

 

Before installing or removing an option board, turn off the power, and disconnect the power plug.

 

Before coming into physical contact with the option board, touch your hand to metal that has been grounded 
to discharge the static electricity in your body.
A safe way to proceed is to wear an anti-static wrist strap. 
The option board may be damaged if you touch the board with static still in your body.

 

Avoid damage to the option board by not dropping it or subjecting it to strong shocks or vibrations.

 

After removing an option board, be absolutely sure to attach the blank panel.

 

When installing or removing an option board, take care not to hurt yourself on the edges or metal parts of the 
board.

Notes



Turn off the power of the mainframe, and disconnect the power cord.



Loosen the two screws of SLOT A or SLOT B at the back of the mainframe, and remove the blank panel.

Screw

Blank panel

Screw

SLOT B

SLOT A

Summary of Contents for AV-HS450































































































































































































Reviews:

No comments

Related manuals for AV-HS450

Baker Hughes Druck DPI 880 Instruction Manual preview
Druck DPI 880
Brand: Baker Hughes Pages: 168
Yamaha A3000 Upgrade Manual preview
A3000
Brand: Yamaha Pages: 50
A&D PT Series Instruction Manual preview
PT Series
Brand: A&D Pages: 30
Federal Signal Corporation AD Series Wiring And Maintenance Instructions preview
AD Series
Brand: Federal Signal Corporation Pages: 4
ParaBody GS2 User Manual preview
GS2
Brand: ParaBody Pages: 7
Hach TenSette plus User Manual preview
TenSette plus
Brand: Hach Pages: 66
Hach sensION+ pH3 User Manual preview
sensION+ pH3
Brand: Hach Pages: 14
Hach sensION MM340 User Manual preview
sensION MM340
Brand: Hach Pages: 144
Hach QuikChem 8500 2 Series Installation Manual preview
QuikChem 8500 2 Series
Brand: Hach Pages: 80
Hach SD900 Basic User Manual preview
SD900
Brand: Hach Pages: 178
Hach DRB 200 Instrument Manual preview
DRB 200
Brand: Hach Pages: 32
hager HTG457H Manual preview
HTG457H
Brand: hager Pages: 4
Jeio tech Lab companion SI-300 Operating Instruction preview
Lab companion SI-300
Brand: Jeio tech Pages: 69
JDS Uniphase IP Video Test Option HST-3000 Product Manual preview
IP Video Test Option HST-3000
Brand: JDS Uniphase Pages: 4
Jct JH Series Operating Manual preview
JH Series
Brand: Jct Pages: 16
R-Biopharm RIDA qLine ZG2601 Operation Instructions Manual preview
RIDA qLine ZG2601
Brand: R-Biopharm Pages: 23
DAN NTP TECHNOLOGY DAD Thunder Core 256 Installation Manual preview
NTP TECHNOLOGY DAD Thunder Core 256
Brand: DAN Pages: 16
Major tech MT245 Instruction Manual preview
MT245
Brand: Major tech Pages: 20

Brands by name

Popular brands

Load more brands