manualshive.com logo in svg

Panasonic AV-HS450, Operating Instructions Manual, Page: 29 / 190

Share
Download
Panasonic AV-HS450 Operating Instructions Manual Download Page 29

29

2. Functions in each area

2-1-8.  Rear panel connections area

12V   IN 1

TALLY / GPI

MAINFRAME

OFF

ON

12V   IN 2

POWER

SIGNAL

GND

LCD CONTRAST

SERVICE

NORMAL

 TALLY/GPI input/output connector [TALLY/GPI] (D-sub 25-pin, female, inch screw)

 For details on how to connect this connector, refer to “6. External interfaces”. 

 MAIN FRAME connector [MAIN FRAME] (RJ-45) (100 Base-TX)

Connect this to the mainframe using the supplied CAT5E cable (STP, straight, 10 m).

 DC power input sockets [12V 

 IN1], [12V 

 IN2] (DC 12 V, 0.8 A)

Connect the supplied AC adapters (for the control panel) to these sockets.

 Ground connector [SIGNAL GND]

Connect to the system’s earth ground.

  Power switch [POWER]

This is used to turn the power on and off.

 SERVICE switch [NORMAL/SERVICE]

This switch is used for maintenance purposes.
For normal operations, select the “NORMAL” position.

 LCD CONTRAST adjustment screw

This is used to adjust the contrast of the LCD display.

Summary of Contents for AV-HS450































































































































































































Reviews:

No comments