Panasonic AV-HS450 Page 134 Operating Instructions Manual Download

Page: 134 / 190

134

5. System settings

5-2-2. Setting the crosspoint switching

The timing at which the crosspoints are to be switched can be set.



Press the [XPT] button to light its indicator and display the XPT menu.



Refer to “2-1-5. LCD menu area”.



Turn [F1] to display the XPTSwch sub menu.

<Menu

display>

XPT 6|Timing | | |
XPTSwch | Any| | |

Field1
Field2



Turn [F2], and select the switching timing using the Timing item.

Any:

The crosspoints are switched in the nearest field. This is suited to live applications.

Field1:

The crosspoints are switched in field 1. This is suited to editing applications.

Field2:

The crosspoints are switched in field 2. This is suited to editing applications.

Summary of Contents for AV-HS450































































































































































































Search results

Summary of Contents for AV-HS450

Reviews:

Related manuals for AV-HS450

Brands by name

Popular brands

Panasonic AV-HS450, Operating Instructions Manual

Search results

Summary of Contents for AV-HS450

Reviews:

Related manuals for AV-HS450

Brands by name

Popular brands