Panasonic AJ-SD965p, Operating Instructions Manual

Page: 53 / 86

53
624
CC REC
For selecting whether to record the closed
caption signals multiplexed on the input
signals on the tape.
0000 OFF :
No closed caption signal is recorded.
In addition, the EE output signals are blanked.
0001 ON :
When a closed caption signal is detected from
the selected input signal, it can be recorded.
<Notes>
O
If 1394 signals have been selected as the
input signals, the closed caption signals which
have been multiplexed onto the input signals
will be recorded on the tape regardless of the
setting.
O
This setup menu is not displayed in the 625i
system.
645
WIDE SELECT
This selects whether or not to record the
wide-screen information on the tape.
0001 WIDE :
The wide-screen information is recorded on
the tape.
0002 NORMAL :
The wide-screen information is not recorded
on the tape.
<Notes>
O
If 1394 has been selected as the input signals
using the INPUT SELECT button, the wide-
screen information on the input signals will be
recorded regardless of this menu’s setting.
O
The aspect ratio cannot be changed by this
unit.
Setup menus
(continued)
The underlined items indicates the initial setting.
No./Item Description
USER menu
<VIDEO>
No./Item Description
623
SETUP 50
For setting 7.5% setup processing to be
performed on input and output signals in the
DVCPRO50 (50 Mbps) mode.
When the STOP button is pressed, operation is
transferred to the sub-screen, and the setup
level is set for each output. To return from the
sub-screen, press the STOP button again.
<Note>
This setup menu is not displayed in the 625i
system.
00
CMPST IN
Sub-screen
This selects the 7.5% setup processing for
the input composite signal.
0000 THRU :
The signal is recorded in its original form.
0001 CUT :
The signal is recorded with the 7.5% setup
removed.
02
CMPNT IN This selects the 7.5% setup processing for
the input component signal.
0000 THRU :
The signal is recorded in its original form.
0001 CUT :
The signal is recorded with the 7.5% setup
removed.
03
CMPNT OUT This selects the 7.5% setup processing for
the output composite, component and serial
(digital) signal.
0000 THRU :
The signal is output in its original form.
0001 CUT :
The signal is output with the 7.5% setup
removed.
0002 ADD :
The signal is output with the 7.5% setup
added.
01
CMPST OUT This selects the 7.5% setup processing for
the output composite signal.
0000 THRU :
The signal is output in its original form.
0001 ADD :
The signal is output with the 7.5% setup
added.
<Note>
Bear in mind the setting for sub-screen item No.
03 (CMPNT OUT) of setup menu item No. 623
(SETUP 50).