Panasonic AJ-SD965p Operating Instructions Manual Download Page 52

Page: 52 / 86

Setup menus

(continued)

The underlined items indicates the initial setting.

USER menu

<VIDEO>

No./Item

Description

621

CCR MODE

This selects the cross color processing
during playback.

0000

OFF :

The cross color is output with no changes
made.

0001

ON :

The cross color can be reduced.

<Note>

This setup menu is not displayed in the 625i
system.

620

ESR MODE

This selects the operation mode for edge
subcarrier reduction (ESR) in the playback
circuit.

0000

OFF :

The mode is forcibly set to OFF.

0001

AUTO :

The mode is automatically set to ON or OFF
depending on the VTR operation.

No./Item

Description

622

SETUP 25

For setting 7.5% setup processing to be
performed on input and output signals in the
DVCPRO (25 Mbps) mode.

When the STOP button is pressed, operation is
transferred to the sub-screen, and the setup
level is set for each output. To return from the
sub-screen, press the STOP button again.

<Note>

This setup menu is not displayed in the 625i
system.

00
CMPST IN

Sub-screen

This selects the 7.5% setup processing for
the input composite signal.

0000

THRU :

The signal is recorded in its original form.

0001

CUT :

The signal is recorded with the 7.5% setup
removed.

02
CMPNT IN

This selects the 7.5% setup processing for
the input component signal.

0000

THRU :

The signal is recorded in its original form.

0001

CUT :

The signal is recorded with the 7.5% setup
removed.

03
CMPNT OUT

This selects the 7.5% setup processing for
the output composite, component and serial
(digital) signal.

0000

THRU :

The signal is output in its original form.

0001

CUT :

The signal is output with the 7.5% setup
removed.

0002

ADD :

The signal is output with the 7.5% setup
added.

01
CMPST OUT

This selects the 7.5% setup processing for
the output composite signal.

0000

THRU :

The signal is output in its original form.

0001

ADD :

The signal is output with the 7.5% setup
added.

<Note>

Bear in mind the setting for sub-screen item No.
03 (CMPNT OUT) of setup menu item No. 622
(SETUP 25).

Summary of Contents for AJ-SD965p























































































Search results

Summary of Contents for AJ-SD965p

Reviews:

Related manuals for AJ-SD965p

Brands by name

Popular brands

Panasonic AJ-SD965p, Operating Instructions Manual

Search results

Summary of Contents for AJ-SD965p

Reviews:

Related manuals for AJ-SD965p

Brands by name

Popular brands