34
4
Upon completion of the setting, release the search
button.
The item number now flashes.
O
When the search dial is in the SHTL mode, the
item will move unless the dial is set to the center
position.
5
When other items are to be changed, repeat steps
2
to
4
.
6
Press the SET button.
The changes are stored in the memory.
To disregard the new settings and restore the
old settings instead, press the RECORDER
button.
O
To return the setup contents to the factory
settings (initial settings), press the RESET button
while the menu is displayed. The following
message is displayed.
If the PLAY button is now pressed, the factory
settings are reinstated.
SETUP-MENU INIT SET
YES<PLAY>/NO<STOP>
Setup
(initial settings)
1
Press the
(SHIFT+RECORDER).
The setup menu screen appears on the LCD
monitor, and the setup menu item number appears
on the counter display.
Each time the FF button is pressed (for about 1.5
seconds), the item number and item name are
selected and displayed alternately.
(If a setup was performed previously, the screen on
which the last change was made is displayed.)
O
The setup menu screen is also displayed on the
TV monitor which has been connected to the
VIDEO OUT 3 connector or SDI OUT 3
connector.
MENU
3
At the position where the change is to be made,
turn the search dial while holding down the search
button.
The settings on the menu screen and display now
flash.
When the dial is turned clockwise, the setting
number is incremented; conversely, when it is
turned counterclockwise, it is decremented.
O
At this time, when the RESET button is pressed
while holding down the search button, the setting
value is returned to the factory setting.
2
Turn the search dial to select the item to be set.
The menu screen cursor (
2
) moves, and the item
number on the display flashes.
O
When the dial is turned clockwise, the item
number is incremented from 001
5
002
5
003
5
004 and so on; conversely, when it is turned
counterclockwise, the item number is
decremented.
O
When the FF button or REW button is pressed
while holding down the PLAY button, the next or
previous item is selected.
O
Whenever possible, limit the use of the search
dial to the JOG mode.
This VTR’s main settings are performed while making
selections using a system of menus.
Changing the settings
ON
POWER
REMOTE
SUPER
REC INH
TCG
MODE
ON
OFF
DVCPRO 50
EJECT
SEARCH
TC
CUE
VIDEO
ASSEM
COUNTER
CH 1
CH 2
CH 3
CH 4
PF 1
PF 2
PF 3
PF 4
RESET
PLAYER RECORDER
SET
TC PRESET
MENU
PF
STAND BY
EDIT
A OUT
OUT
IN
SET
A IN
PREROLL
AUTO EDIT
PREVIEW/
REVIEW
INPUT SELECT
METER
AUDIO MON SEL
AUDIO MIX
HEADPHONES
AUDIO VOL SEL
VIDEO
CH 1
R
MIX
1&2
CH1/3
PULL
CH2/4 REC CH1/3
CH1/3 CH2/4 REC CH2/4
3&4
L
CH 2
CH 3
CH 4
AUDIO
FULL/FINE
REC
PLAY
REW
FF
SHIFT
PULL
STOP
INSERT
PUSH
DVCPRO
DV
2
X
OFF
REC
PB
UNITY
VAR
ON
OFF
INT
EXT
TAPE
EE
XL/L/M-cassette
SHTL
JOG
SLOW
4
2
6
3
1
MENU
FF button
<Notes>
O
If the RESET button is pressed to restore the
factory settings, only the user files currently in use
are restored. The other user files remain
unaffected.
O
The changes made to the SYSTEM menu
contents are recorded also by pressing the
RECORDER button to close the menu screen.
Summary of Contents for AJ-SD965p
Page 85: ...Memo ...
