Panasonic AJ-SD965p, Operating Instructions Manual

Page: 48 / 86

48
Setup menus
(continued)
The underlined items indicates the initial setting.
USER menu
<EDIT>
No./Item Description
401
SRC PROTECT
When the time selected as the setup menu
item No. 400 (STILL TIMER) setting elapses
while the unit is in the search STILL
(JOG/SLOW/SHTL) mode, the unit
automatically enters one of the tape
protection modes. This menu item is for
selecting which tape protection mode the
unit is to enter.
0000 STEP : STEP FWD
0001 HALF : HALF LOADING
<Note>
When STEP FWD is selected, the unit
automatically goes into the STANDBY OFF
(HALF LOADING) mode when the total time for
which the unit is left standing in the still status
reaches 30 minutes (or 1 minute for a
DV/DVCAM tape).
402
DRUM STDBY
This selects the drum operation in the
STANDBY OFF (HALF LOADING) mode.
0000 OFF : The drum stops rotating.
0001 ON : The drum continues rotating.
USER menu
<TAPE PROTECT>
No./Item Description
400
STILL TIMER
This selects the time to be taken until the
unit goes into the tape protection mode when
it is left standing in the stop or search still
(JOG/SLOW/SHTL) mode.
(Unit: s = second, min = minute)
0000 0.5s
0001 5s
0002 10s
0003 20s
0004 30s
0005 40s
0006 50s
0007 1min
0008 2min
<Notes>
O
STEP FWD and HALF
LOADING are provided in
the tape protection mode.
Either of these can be set
for STOP and SEARCH
STILL.
O
The cumulative standby
time at the same tape
position increases when
transmitting programs or
otherwise using identical
materials repeatedly.
In order to protect the tape,
it is recommended that the
shortest possible setting for
the standby time in the
same tape location is used.
O
When a DV/DVCAM tape is
used, any setting above 10
seconds will be treated as
10 seconds.
No./Item Description
403
STOP
PROTECT
When the time selected as the setup menu
item No. 400 (STILL TIMER) setting elapses
while the unit is in the STOP mode, the unit
automatically enters one of the tape
protection modes. This menu item is for
selecting which tape protection mode the
unit is to enter.
0000 STEP : STEP FWD
0001 HALF : HALF LOADING
<Note>
When STEP FWD is selected, the unit is
automatically transferred to the STANDBY OFF
(HALF LOADING) mode when the total time
during which it has been left standing in the
STOP mode reaches 30 minutes (or 1 minute for
a DV/DVCAM tape).
324
JOG REV MAX
This sets the maximum JOG REV speed.
0000 –4.1 : –4.1 (–3.1)
a
speed
0001 –1.85 : –1.85
a
speed
0002 –1 : –1
a
speed
0003 –0.43 : –0.43 (–0.5)
a
speed
<Notes>
O
The value for the DV/DVCAM tape is shown in
parenthesis ( ).
O
The maximum speed is set to –1
a
when the
dial on the front panel is operated.
325
POSTROLL TM
This sets the postroll time.
Any time from 0 to 5 seconds can be set in 1-
second units.
0000 0s
0001 1s
0002 2s
0003 3s
0004 4s
0005 5s