Panasonic AGM1PG04L Reference Manual Download Page 20

Page: 20 / 166

2.3 Names and Functions of Parts of the GM1 Pulse Output Unit

No.

Name

Function

(1)

Unit connector

This is a connector to which each expansion unit is connected.

(2)

Operation monitor LEDs

These LEDs indicate the status of expansion units.

(3)

Operation monitor selection
switch

This switches operation display between the display for axes 1 and
2, and that for axes 3 and 4.

(4)

Output connector

This is used to connect an output device.

(5)

Expansion hook

This is a hook used to fix each expansion unit to another.

(6)

DIN rail attachment part

This is the part which is attached to the DIN rail.

(7)

DIN hook

Used to fix the Controller to a DIN rail

■

Names and functions of each operation monitor LED

No.

Name

LED color

Function

(1)

Power

Blue

Indicates the completion of power processing of the unit.
Lit: Power supply of the unit is started normally.
Unlit: Power is not supplied. Or, there is an error in the power supply
to the system.

(2)

Alarm

Red

Indicates that an alarm has occurred in the unit.
Lit: Unit error
Unlit: Normal

(3)

Green

Indicates the pulse output A signal.

(Note 1)

2.3 Names and Functions of Parts of the GM1 Pulse Output Unit

2-6

WUME-GM1PG-01

Summary of Contents for AGM1PG04L







































































































































































Search results

Summary of Contents for AGM1PG04L

Reviews:

Related manuals for AGM1PG04L

Brands by name

Popular brands

Panasonic AGM1PG04L, Reference Manual

Search results

Summary of Contents for AGM1PG04L

Reviews:

Related manuals for AGM1PG04L

Brands by name

Popular brands