Panasonic AGHPG10 - MEMORY CARD PORTABLE RECORDER Operating Instructions Manual Download

Page: 83 / 92

For your

reference

Playback

Mosaic-like noise appears
during rapid forward or
rapid reverse playback.

• This phenomenon is characteristic of digital equipment. It is not a

sign of trouble.

—

No playback pictures
appear even though the TV
set is connected properly.

• Is the input selector on the TV set at the “video input” position?

Carefully read the instructions accompanying the TV set, and select
the connected video input connector.

—

No playback sound is heard
from the unit’s speaker.

• Has the unit’s volume level been turned down too low? Press the

AUDIO MON/VAR “+” button, and adjust the volume level.

P 64

No hot swap playback.

• This unit does not support hot swap playback. To continue

playback, stop playback, and then replace the P2 card with another
card.

P 48

Summary of Contents for AGHPG10 - MEMORY CARD PORTABLE RECORDER





























































































Search results

Summary of Contents for AGHPG10 - MEMORY CARD PORTABLE RECORDER

Reviews:

Related manuals for AGHPG10 - MEMORY CARD PORTABLE RECORDER

Brands by name

Popular brands

Panasonic AGHPG10 - MEMORY CARD PORTABLE RECORDER, Operating Instructions Manual

Search results

Summary of Contents for AGHPG10 - MEMORY CARD PORTABLE RECORDER

Reviews:

Related manuals for AGHPG10 - MEMORY CARD PORTABLE RECORDER

Brands by name

Popular brands