83
Adjustments and Settings for Recording : Handling data
A
d
ju
stm
ents and S
e
tti
ngs f
o
r
Rec
o
rdi
n
g
An SD memory card (optional accessory) can be used as
a setup card that stores up to eight files of settings menu
specifications.
This data allows you to quickly reproduce an optimum
state.
Regarding SD memory cards, please see <Cautions in
using SD memory cards> (page 22).
An SD memory card may be inserted or removed, either before or after the power is turned on.
Open the lid of the switch cover, and insert an SD memory
card (optional accessory) into the SD memory card slot
with the notch upward. Close the lid.
Note
An SD memory card must be inserted with the right side
facing the slot. If the card is hard to insert, it may be
reversed or upside down. Do not force it into the slot.
Check the card before re-inserting it.
Open the lid of the switch cover, and ensure that the BUSY
lamp is not illuminated. Then, further depress the SD
memory card towards the main unit. This releases the SD
memory card from the insertion slot. Take hold of the SD
memory card and remove it. Close the lid.
SD memory cards must not be used or stored in an
environment where they may be
z
Exposed to high temperatures/humidities;
z
Exposed to water droplets; or
z
Electrically charged.
For storage, the SD memory card must be kept inserted
into the unit with the lid closed.
To format an SD memory card, write settings data or read
data on an SD memory card, navigate the menu to the
<SD CARD READ/ WRITE> screen from the FILE page.
If an SD memory card that is formatted in a standard other
than the SD standards and SDHC standards, [FORMAT
ERROR] is displayed in the top right section of the window.
In this case, reformat the card as follows. Note that the
indication “FORMAT ERROR” does not disappear if the SD
memory card is replaced with this menu page open. When
the SD memory card is replaced, perform TITLE READ.
Setting Data Using an SD memory card
Handling SD memory cards
To insert an SD memory card
To remove the SD memory card
Formatting, Writing and Reading an SD memory card
#
< SD CARD READ/WRITE >
R.SELECT :1
READ
W.SELECT :1
WRITE
CARD CONFIG
TITLE READ
TITLE:
1: ******** 5: ********
2: ******** 6: ********
3: ******** 7: ********
4: ******** 8: ********
AJ-HPX3000G(VQT1D27)E.book 83 ページ ２００７年９月３日 月曜日 午後２時３４分
