185
Menu : Menu Description Tables
Me
n
u
The ____ in the Adjustable Range column indicates the
preset mode.
MIC/AUDIO2
Items/
Data Saved
Adjustable
Range
Remarks
FRONT MIC
POWER
ON
OFF
Select the phantom power supply for the
front microphone.
– C U F –
REAR MIC
POWER
ON
OFF
Select the phantom power supply for the
rear microphone.
When OFF is selected, no phantom
power is supplied even if the REAR
AUDIO CH1 or CH2 switch is set to +48.
– C U F –
MONITOR
SELECT
STEREO
MIX
When the MONITOR switch is set to ST
(stereo), select the signal format for the
monitor output.
– C U F –
FRONT MIC
LEVEL
–40dB
–50dB
Select the front microphone input level.
– C U F –
REAR MIC
CH1 LVL
–50dB
–60dB
Select the rear microphone input level.
– C U F –
REAR MIC
CH2 LVL
–50dB
–60dB
Select the rear microphone input level.
– C U F –
REAR LINE IN
LVL
+4dB
0dB
–3dB
Select the rear line input level.
– C U F –
AUDIO OUT
LVL
+4dB
0dB
–3dB
Select the audio output level.
– C U F –
HEADROOM
18dB
20dB
Set the headroom (standard level).
– C U F –
WIRELESS
WARN
ON
OFF
Select whether or not to enable the
alarm to trigger for poor wireless
receiver reception.
– C U F –
TC/UB
Items/
Data Saved
Adjustable
Range
Remarks
TC MODE
DF
NDF
Set the time code mode.
DF:
Drop frame.
NDF:
Non drop frame.
Note
When the camera-recorder operates at
50 Hz or in 24P or 24PA mode, the non-
drop frame is always used.
– C U F –
UB MODE
USER
TIME
DATE
EXT
TCG
FRM RATE
REGEN
Select the user bits mode.
USER:
Select UB value set in the LCD
section.
TIME:
Select local time (hours,
minutes, seconds).
DATE:
Select local date and time (2 last
digits of year, month, date, time).
EXT:
When "CAM" , "VIDEO", or
"SDI" is selected in REC
SIGNAL on the SYSTEM MODE
screen, the user bits input to the
TC IN connector are recorded.
When "1394" is selected, the
user bits of signals input to the
DVCPRO connector are
recorded.
If reading fails, USER value is
retained.
TCG:
TCG value enters UB.
FRM RATE:
Select the shooting information (e.g.
frame rate) for the camera. For more
information, see [Frame rate
information recorded in user bits]
(page 58).
When clips recorded in Native mode
are played back, the frame rate
information recorded in users bits in
the VAUX range is output.
REGEN:
Read out value stored in the
card and record value
continuously.
– C U F –
VITC UB
MODE
USER/EXT
TIME
DATE
TCG
FRM RATE
REGEN
Select the user bits mode for VAUX TC
(VITC).
USER/EXT:
If UB MODE is set to EXT, the EXT
value is recorded. If not, USER value
set by UB is recorded.
TIME:
Select local time (hours,
minutes, seconds).
DATE:
Select local date and time (2 last
digits of year, month, date, time).
TCG:
TCG value enters UB.
FRM RATE:
Select camera shoting information
(frame rate, etc.). For more
information, see [Frame rate
information recorded in user bits]
(page 58).
REGEN:
Read out value stored in card
and record value continuously.
Note
When the camera-recorder operates in
24P, 24PA, 30P (AVC-I) or 25P (AVC-I)
mode, FRM RATE is always selected.
– C U F –
AJ-HPX3000G(VQT1D27)E.book 185 ページ ２００７年９月３日 月曜日 午後２時３４分
