82
Adjustments and Settings for Recording : Handling data
The unit employs 6 sets for the file data area.
FACTORY data:
The area for storing factory settings
Data cannot be revised with menu operations.
USER data:
The area for storing the data set by menu operations
The FACTORY data is stored as the factory setting.
CURRENT data:
The area for storing the operating status of the unit
The set value in this area is revised by menu
operations.
SCENE file:
Four sets of scene files are provided.
LENS file:
Eight sets of lens files are provided.
CAC file:
32 chromatic aberration compensation data area sets
are provided.
For menu items that can be read from or stored in the
respective areas, refer to [Menu] (page 155)
Notes
z
For information about how to navigate through the menu
for this section, see [Setting Menu Options] (page 157).
z
Access the respective data settings files after switching
the PC MODE to “OFF”. If the respective data settings
files are accessed when the unit is in USB DEVICE
mode, an error may occur. The PC MODE can be
operated from the <SYSTEM MODE> screen on the
SYSTEM SETTING page.
Handling data
Set data file configuration
LENS FILE
READ
LENS FILE
WRITE
WRITE USER
DATA
READ USER
DATA
LENS FILE CARD R/W
WRITE
LENS FILE CARD R/W
READ
READ FACTORY
DATA
SD CARD READ/WRITE
WRITE
SD CARD READ/WRITE
READ
SCENE
WRITE
SCENE
READ
CAC FILE CARD READ
READ
CAC
CONTROL
CAC FILE CARD READ
DELETE
CAC ADJ
CAC FILE DELETE
Menu operations
To revise the set
value
SD memory card
SET UP data
No. of files: 8
It is possible to write eight
setup files on the SD
memory card.
CURRENT data
(Operating status of the unit)
No. of files: 1
USER data
No. of files: 1
FACTORY data
(Revision disable)
No. of files: 1
: Files built in the unit
: Menu operations
SCENE file
No. of files: 4
LENS file
No. of files: 8
SD memory card
Lens file
No. of files: 8
a
8
It is possible to write eight
titles for eight lens files on
the SD memory card.
CAC file
No. of files: 32
SD memory card
AJ-HPX3000G(VQT1D27)E.book 82 ページ ２００７年９月３日 月曜日 午後２時３４分
