Recording
53
5
After the time code value has been set,
press [MENU/MODE CHK].
6
Using , move to “YES”, and press .
TC PRESET
PRESET OK?
NO
PUSH STILL
YES
___
7
Press [MENU/MODE CHK] 2 times to release
the menu mode.
Set the user’s bit
Setting user’s bit allows you to store 8-digit
information (such as the date and time) in the
hexadecimal format on the sub code track.
User’s bit is automatically saved in the memory
and retained after you turn off the power.
1
Hold down [POWER] for at least 2 seconds
to turn the power on.
2
Select “OFF” as the “1394 UB REGEN” item
setting on the setting menu “RECORDING
SETUP” screen.
• Basic operations on the setting menus. (Page
3
Select “USER” as the “UB MODE” item
setting on the “RECORDING SETUP”
screen.
4
Select “YES” at the “UB PRESET” item
on the “RECORDING SETUP” screen, and
press .
RECORDING SETUP
PUSH MENU TO RETURN
UB PRESET
1394 IN PRESET
YES
5
Set the user’s bit.
Using and , select the user’s bit characters.
• You can use numbers from 0 to 9 and letters
from A to F.
UB PRESET
PUSH MENU TO RETURN
+/-
SEL
: PUSH
: PUSH
0
0 0 0 0 0 0 0
Using , move to the next digit, and press
and again to select the character.
UB PRESET
PUSH MENU TO RETURN
+/-
SEL
: PUSH
: PUSH
0
0
0 0 0 0 0 0
If [RESET/TC SET] is pressed while setting the
user’s bit, the user’s bit value will be reset to zero.
6
After the user’s bit has been set, press
[MENU/MODE CHK].
7
Using , move to “YES”, and press .
UB PRESET
PRESET OK?
NO
PUSH STILL
YES
___
8
Press [MENU/MODE CHK] 2 times to release
the menu mode.
