37
Playback
Copying clips
Clips can be copied onto the P2 cards in either of the P2 card slots.
• While clips are being copied, do not turn off the power or eject the card. Otherwise, defective clips will be
produced. If defective clips are produced, delete them, and copy the original clips again.
• Copy incomplete clips after having connected them.
1
Display the thumbnail display screen.
2
Select the clip to be copied.
3
Press [MENU/MODE CHK].
4
Using , and , select “OPERATION”
– “COPY” – “SLOT n” (where “n” is the
number of the P2 card slot into which the
copy destination P2 card was inserted), and
press .
5
Select “YES”, and press .
Clip copying now starts.
• To stop the copying process at any time, press
to cancel the copying. The partially copied clip at
the copy destination will be deleted.
• If there is a clip with the same GLOBAL CLIP ID-
-one which, for instance, was previously copied
to the copy destination--“OVER WRITE” will
appear. To overwrite the existing clip, select YES
or to cancel the overwriting, select NO, and press
. (“OVER WRITE” also appears when copying
onto the P2 card a different clip which has been
recorded on a multiple number of cards.)
6
When the completion message has
appeared, press “OK” ( ).
Clips cannot be copied when any of the following
error messages are displayed.
• “LACK OF REC CAPACITY!”
Clips will not be copied because there is
insufficient memory at the copy destination.
• “UNKNOWN CONTENTS FORMAT!”
Clips will not be copied because the selected
clips include defective clips.
• “NO COPY TO SAME CARD!”
Clips will not be copied because an attempt is
being made to copy clips to the same card.
• “TOO MANY CLIPS!”
Clips will not be copied because too many clips
have been selected.
• Clips displayed by the
X
defective clip indicator
cannot be copied.
• It may not be possible to copy clips for which the
?
unknown clip indicator is displayed.