20
-English-
Recording Features
External Microphone
with M3 connector (not
supplied)
External
Microphone Jack
The original sound can be replaced with
new sound using an external microphone
or external recording source.
Audio Dubbing using the
External Microphone or
External Recording Source
1
Set POWER to ON
while pressing the
white button.
2
Press (PLAY). Then press
(PAUSE)
where you want dubbing to
begin.
3
Press MENU
to display the MAIN
MENU screen.
4
Press +/–
to select
REC MODE
, then
press SET
to display the REC MODE
menu screen.
5
Press +/–
to select
AV JACK
, then
press SET
to select OUT/PHONES or
IN.
• When OUT/PHONES is selected,
AUDIO SEL is automatically set to
MIC.
6
Press +/–
to select
AUDIO SEL
, and
then
press SET
to select MIC.
• Go to step
7
on page 21.
Before you begin
• Connect the external Microphone
(if used).
• Connect this unit and the external
recording source using the A/V Cable.
(if used).
• Turn this unit on.
• Insert a pre-recorded tape to be
dubbed.
• Select 12 bit if you do not want the
original sound to be completely replaced
during an audio dub.
• With tape containing both 12 bit and
16 bit audio, please note that if dubbing is
started in a 16 bit portion, the 12 bit audio
will also be completely replaced.
12 bit
16 bit
The original sound is recorded on
ST (Stereo) 1, and the new
sound will be recorded on ST
(Stereo) 2.
The original sound is replaced
with the new sound.
4, 5, 6
+/– (SELECT)
3
MENU
1
POWER
4, 5, 6
SET
2
PLAY
2
PAUSE
When using an External Microphone
DV1DC.Eng19-21.p65
2003/02/28, 17:02
20
