10
-English-
1
Slide the Battery upward while pushing
BATT RELEASE to
remove the
Battery Pack
.
(p. 9)
2
Insert the DC Cable
into the DC IN
Terminal.
3
Connect the other end of the DC
Cable
to the AC Adaptor as shown.
4
Plug in the AC Adaptor.
• The POWER Lamp on the AC
Adaptor lights up.
• When not in use, unplug the AC Adaptor
from the AC outlet.
DC Cable
(Supplied)
DC IN Terminal
Note
1
2
POWER
Lamp
Supplying Power
Caution:
• Charge only with specified charger.
• Charge the Battery within an ambient
temperature range of 10 °C and 30 °C.
• The Battery may be warm after charging
or just after use. This is normal.
• Do not use an insufficiently charged or
worn out Battery.
• If charging is done in extreme low or high
temperatures, Battery charge time
increases.
Safety precautions:
• Do not place the Battery near, or dispose
of in fire.
• Do not directly connect (short circuit) the
positive (+) and negative (–) terminals.
• Never attempt to disassemble or
reassemble the Battery.
To avoid damage to the Battery:
• Do not drop or jar the Battery.
• Use the Battery with specified models
only.
• If the Battery is used in extremely high
temperatures, a safety device will
automatically prevent operation.
To ensure longer battery life:
•
While not in use, remove Battery from
this unit and AC Adaptor and store in a
cool, dark, dry place.
If you leave the
Battery in this unit or on the AC Adaptor,
the Battery will no longer be rechargeable.
• Keep the Battery terminals clean.
Battery Care
DC Output Connector
Use AC Adaptor
2
BATT RELEASE
1
Connect the AC Adaptor correctly as
shown in the figure.
• The battery cannot be charged while
supplying power from the AC Adaptor to
the camera recorder.
DV1DC.Eng9-12.p65
2003/02/28, 17:02
10