Chapter 4 Operation
—
Menu settings
- 80 -
[REC FUNCTION]
[REC MODE]
Selects the recording mode.
(Factory setting: [NORMAL])
[INTERVAL TIME]
Sets the interval duration for interval recording.
The items that can be set are as follows.
≥
[1s], [2s], [5s], [10s], [30s], [1min], [5min], [10min]
(Factory setting: [5min])
[TC/UB]
[TC PRESET]
Sets the default value of the time code to record.
(Factory setting: [00]) (each item)
≥
“h” is an abbreviation for hour, “m” for minute, “s” for second and “f” for frame.
[UB PRESET]
Sets user bits.
Enabled only when [USER] is selected in [UB MODE] of [TC/UB].
Each digit can be set in following range.
≥
[00]…[FF]
(Factory setting: [00])
[FREE/REC RUN]
Sets how the time code generator advances.
(Factory setting: [REC RUN])
@
NOTE
0
The setting is fixed to [REC RUN] when the [SYSTEM] menu
→
[SUPER SLOW]
→
[ON] is set.
0
The setting is fixed to [FREE RUN] when the [RECORDING] menu
→
[PRE REC]
→
[ON] is set.
0
The setting is fixed to [FREE RUN] when the [RECORDING] menu
→
[2 SLOTS FUNC.]
→
[BACKGR REC] is set.
0
The setting is fixed to [REC RUN] when the [RECORDING] menu
→
[REC FUNCTION]
→
[REC MODE]
→
[INTERVAL] is set.
[DF/NDF]
Sets the count method for the time code generator.
Enabled only when the frame rate of the [SYSTEM] menu
→
[REC FORMAT] is set to 59.94i/59.94p/29.97p.
(Factory setting: [DF])
@
NOTE
0
The setting is fixed to [NDF] when the [RECORDING] menu
→
[REC FUNCTION]
→
[REC MODE]
→
[INTERVAL] is set.
[NORMAL]
Performs the standard recording.
[INTERVAL]
Performs the interval recording. (
131)
Hour
[00]…[23]
Minute
[00]…[59]
Second
[00]…[59]
Frame
[00]…[23] (when [23.98p])
[00]…[24] (when [50.00i], [50.00p], or [25.00p] is set)
[00]…[29] (when [59.94i], [59.94p], or [29.97p] is set)
[FREE RUN]
Advances regardless of the operation mode.
[REC RUN]
Advances only while recording.
[DF]
Uses the drop frame mode.
[NDF]
Uses the non-drop frame mode.
Summary of Contents for AG-CX7
Page 8: ...Chapter 1 Overview Before using the unit read this chapter ...
Page 188: ...Chapter 10 Notes Maintenance of the unit or frequently asked questions are described ...
Page 199: ...Chapter 11 Specification This chapter describes the specifications of this product ...
Page 208: ... Panasonic Corporation 2020 Panasonic Corporation Web site http www panasonic com ...