Panasonic AG-CX7 Operating Instructions Manual Download Page 76

Page: 76 / 208

Chapter 4 Operation

—

Menu settings

- 76 -

[SHUTTER]

Switches display/hide of the shutter speed.
The items that can be set are as follows.

≥

[ON], [OFF]

(Factory setting: [ON])

[IRIS]

Switches display/hide of the iris value and the auto iris control status.
The items that can be set are as follows.

≥

[ON], [OFF]

(Factory setting: [ON])

[AE LEVEL]

Switches display/hide of the AE level.
The items that can be set are as follows.

≥

[ON], [OFF]

(Factory setting: [ON])

[ZOOM/FOCUS]

Switches the units of zoom and focus values.

(Factory setting: [NUMBER])

[WHITE BALANCE]

Switches display/hide of the color temperature.
The items that can be set are as follows.

≥

[ON], [OFF]

(Factory setting: [ON])

[FACE DETECTION]

Switches whether to display the face detection frame when the face detection/tracking AE&AF function is operating.

(Factory setting: [ALL])

[DATE/TIME]

Switches display/hide of the date and time.
The display for the year, month, and day follows the [DATE FORMAT] setting.
The date and time are not displayed when the time stamp function is enabled.

(Factory setting: [OFF])

[MULTI MANUAL]

Switches display/hide of the multi manual function.
The items that can be set are as follows.

≥

[ON], [OFF]

(Factory setting: [ON])

[D.ZOOM]

Switches display/hide of digital zoom ratio.
The items that can be set are as follows.

≥

[ON], [OFF]

(Factory setting: [ON])

[IR REC]

Switches display/hide of the settings in the [CAMERA] menu

→

[SW MODE]

→

[IR REC].

The items that can be set are as follows.

≥

[ON], [OFF]

(Factory setting: [ON])

[NUMBER]

Displays a position value for the zoom from [00] to [99] and focus from [00] to [99].

[mm/feet]

Displays the zoom in units of millimeters and the focus in units of feet.

[mm/m]

Displays the zoom in units of millimeters and the focus in units of meters.

[OFF]

Does not display either the zoom or focus.

[ALL]

Displays all face detection frames.

[MAIN FACE]

Displays only the main face frame (orange frame).

[OFF]

Face detection frames and tracking frames are not displayed.

[OFF]

Does not display the date and time.

[DATE]

Displays only the date.

[TIME]

Displays only the time.

[DATE&TIME]

Displays the date and time.

Summary of Contents for AG-CX7

















































































































































































































Search results

Summary of Contents for AG-CX7

Reviews:

Related manuals for AG-CX7

Brands by name

Popular brands

Panasonic AG-CX7, Operating Instructions Manual

Search results

Summary of Contents for AG-CX7

Reviews:

Related manuals for AG-CX7

Brands by name

Popular brands