Panasonic AG-CPD15P Operating Instructions Manual Download Page 114

Page: 114 / 140

114

Symptom

Remedy

Video is distorted or not
recorded.

• Are Color Camera and video monitoring equipment

connected properly?

• Are both the video input connector selection

and the input selection made with the Remote

Control Panel the same?

• Are the video outputs settings correct for the

connected equipment? Connect a monitor to the

[VIDEO OUT] connector on the rear panel of the

Memory Card Video Recorder and check the

picture.

Sound is distorted or not
recorded.

• Is the cable connection to the audio input correct?

• Are both the audio input connector selection

and the input selection made with the Remote

Control Panel the same?

• Are the audio outputs settings correct for the

connected equipment? Refer to the Operating

Instructions for the connected device.

Information from equipment

connected via the [GPIO/

SERIAL] connector is not

recorded in the meta data file.

• Do the communications settings of the connected

device match those of the recorder’s [GPIO /

SERIAL] connector? Check this while referring to

the Operating Instructions for connected equipment.

Troubleshooting

(continued)

Summary of Contents for AG-CPD15P













































































































































Search results

Summary of Contents for AG-CPD15P

Reviews:

Related manuals for AG-CPD15P

Brands by name

Popular brands

Panasonic AG-CPD15P, Operating Instructions Manual

Search results

Summary of Contents for AG-CPD15P

Reviews:

Related manuals for AG-CPD15P

Brands by name

Popular brands