17
Operation on the Memory Card V
ideo Recorder
Notes:
• Do not try to turn the key further
than the stop position, and do not
move it unnecessarily, to prevent
damage to the key and lock.
• To prevent damage, do not exert
undue force on the open cover.
P2 card Insertion and Removal
Inserting a P2 card
(2) Insert a P2 card into the P2
card slot and push it in until
the Eject button pops out.
Do not push in
this direction.
Eject button
Insert the card
with the P2 logo
facing up.
Do not touch to avoid
the risk of injury.
(3) Fold the protruding Eject
button to the right.
Note:
After confirming that the Eject button
is folded over to the right, close the
P2 card slot cover. Otherwise the
Eject button will be damaged.
Do not insert or remove a P2 card when another P2 card is being accessed
(while the [BUSY] lamp is lit or blinking). Otherwise the P2 card may be
damaged or P2 card data may be corrupted.
(1) Open the P2 card slot cover.
Insert the key in the lock and
turn it clockwise to [ ].
Note:
The [BUSY] lamp blinks for a few
seconds when the P2 card slot
cover is opened. Make sure that
the blinking has stopped before
inserting a P2 card.
Before use
(Continued on the next page)
Summary of Contents for AG-CPD15P
Page 138: ...138 MEMO ...
Page 139: ...MEMO 139 ...
