Panasonic AG-CPD15P Operating Instructions Manual Download Page 119

Page: 119 / 140

119

roubleshooting

and Reference

Error messages

(continued)

No.

Message

Measure

E20801 The recorder reboots by

unrecoverable card ejection

error.

Be sure to use the correct procedure to

remove and load P2 cards.

E20802 The recorder reboots by

unrecoverable card insertion

error.

E20803 Card is not ready.

Please try to reinsert the card,

or Reboot from Menu.

Check the P2 card and re-insert it, or

reboot this unit.

E20901 Firmware Update FAILED!

An error occurred during the update.

• Check whether the update file for this

unit has been correctly copied to the

P2 card or USB memory device.

• Reformat the P2 card or USB memory

device before use.

• Use another USB memory device.

• Check whether there are multiple

update files on the P2 card or USB

memory device.

• Check whether there are multiple P2

cards and/or USB memory devices

containing update files.

• A P2 card with a \DATA folder cannot

be used for updating.

• A USB memory device containing a

folder other than the \WIDKEY folder

cannot be used for updating.

E20911 Microcontroller Update

FAILED!

An error occurred during the update.

This unit reboots automatically to restart

an update.

Contact your supplier if the problem

persists.

E20912 Unsupported Microcontroller

Detected!

This unit has broken down.

Contact your supplier.

E20921 AG-RCP30 Update FAILED!

An error occurred during an update of

an AG-RCP30 connected to this unit.

This unit reboots automatically to restart

an update.

Contact your supplier if the problem

persists.

Summary of Contents for AG-CPD15P













































































































































Search results

Summary of Contents for AG-CPD15P

Reviews:

Related manuals for AG-CPD15P

Brands by name

Popular brands

Panasonic AG-CPD15P, Operating Instructions Manual

Search results

Summary of Contents for AG-CPD15P

Reviews:

Related manuals for AG-CPD15P

Brands by name

Popular brands