Panasonic AG-CPD15P, Operating Instructions Manual

Page: 19 / 140

19
Operation on the Memory Card V
ideo Recorder
Turning the Recorder On and Off
Recorder power is supplied from the vehicle’s battery.
On
Off
Turn the vehicle’s ignition switch
to ON or ACC.
Power to the recorder is turned on.
If the Remote Control Panel is
connected, its power is also turned
on.
Turn the vehicle’s ignition switch
to LOCK (OFF).
Power to the recorder is turned off.
If the Remote Control Panel is
connected, its power is also turned
off.
Notes:
• The recorder cannot be turned off
from the Remote Control Panel.
• The [PowerOff Time] can be set
(see “PowerOff Time” on page 75)
to allow the recorder to continue
operating for up to 180 minutes
after the vehicle’s ignition switch is
turned to LOCK (OFF).
About the Internal Clock
Confirming the Time
The internal clock is set at the time of factory default. Check the time before
using, and reset the clock if necessary. (see “Date/Time” on page 79)
Note:
To use GPS, connect the GPS antenna (included in the separately sold Cable
Kit) to the [GPS-ANT.] connector on the rear panel.
Consult your supplier and request connection.
During GPS reception, the signals received will regularly and automatically set
the recorder clock to GPS time.
Time Zone Setting
The factory default time zone setting is “Eastern Standard Daylight Saving Time”.
When using in a different time zone, set the time zone for your region.
(see “TimeZone” on page 79)