manualshive.com logo in svg

Panasonic AFP7CPS31, User Manual

Share
Download
Panasonic AFP7CPS31 User Manual Download Page 69

6.2

 

What to Do If an Error Occurs

 

6-7

 

 

terminal, there is probably an abnormality in the power supply or the input device. 

4.  Monitor the input status using the tool software FPWIN GR7. 

If the input monitored is off, there is probably an abnormality with the unit's input 
part.  
Modify the program if the input monitored is on. If the input device is a two-wire 
sensor, influence of leaked current is possible. 

KEY POINTS

 

 

When the program is to be reviewed, check the following points. 

1. Check if output specifications are rewritten (e.g. duplicated output use) 

2. Check if the program flow has been changed due to an MCR instruction, JMP 
instruction or other control instructions. 

3. Check if the I/O map allocation agrees with the actual mount status. 

 

Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: [email protected]

Summary of Contents for AFP7CPS31














































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands