manualshive.com logo in svg

Panasonic AFP7CPS31, User Manual

Share
Download
Panasonic AFP7CPS31 User Manual Download Page 55

5.4

 

SD Memory Card Operation

 

5-9

 

 

5.4  SD Memory Card Operation 

5.4.1  Preparing SD Memory Cards 

Usable SD memory cards

Use of Panasonic SD memory cards (for industrial use) is recommended. 
(Note) An operation check has not been conducted for SD memory cards made by other 
manufacturers. 

Usable SD memory cards 

Logo printed on 

the CPU unit 

Card type 

Capacity 

SD memory card 

2GB 

SDHC memory card 

4GB to 32GB 

Cautions on handling an SD memory card

The data saved in the SD memory card may be lost in the following cases. We assume no 
responsibility whatsoever for the loss of saved data. 

• The user or a third party has misused the SD memory card.
• The SD memory card has been affected by static electricity or electric noise.
• The SD memory card was taken out, or the PLC body was powered off, while the card was
being accessed (e.g. saving data into the card, deleting data from the card). 

Formatting of SD memory cards

In principle, SD memory cards have been formatted by the time of purchase, and no 
formatting by the user is required. If formatting becomes necessary, download formatting 
software for SD memory cards on the following website. 

NOTES

 

A file system formatted by PC's standard formatting software does not
satisfy the SD memory card specifications. Please use the dedicated
formatting software.
It is recommended to save important data in another media for backup.
Never remove the card or power off the PLC body while the SD LED on the
CPU unit is flashing (data is being read from or written into the card). Data
may be damaged.

Do not use a SD memory card with the memory capacity of which is more
than the usable capacity. Data in the card may be damaged.

Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: [email protected]

Summary of Contents for AFP7CPS31














































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands