Panasonic AFP0HC32ET, User Manual

Page: 26 / 102

Cyclic Communication
2-8
2.2.3 Example of Configuration When FP0H is Originator and Target
Example of Configuration When FP0H is Originator and Target
FP7
Target 1
Low-order PLC
Input Only
I/O device B
Exclusive Owner
Target 2 Target 3
Target 4
Connection 1
Sends data to FP7.
Connection 2
Sends data from FP7.
Connection 3
Receives data.
Connection 4
Receives data.
Connection 5
Sends and Receives data.
FP0H
FP0H
I/O device A
Input Only
Originator 1
In the example, the FP0H uses five connections.
Set the FP0H as below to send/receive data with the high-order FP7.
•
Register the FP7 in the scan list and set the connection information.
• Register the I/O map for connecting the FP7 and set the tag/instance information.
Set the FP0H as below to receive data from low-order devices (low-order PLC, I/O devices A
and B). When the connection with a target is "Exclusive Owner", data can be sent and
received.
• Register the low-order PLC, I/O devices A and B in the scan list and set the connection
information.