Panasonic AFP0HC32ET, User Manual

Page: 66 / 102

Tool Operation
4-16
(3) Scan List Communication Load State
Shows the calculation result of the communication load of the communication in which the
FP0H is originator.
Item Description
Load Factor Breakdown Shows the load factor breakdown of each target.
Adapter (Target) Load Factor
The load factor calculated from the communication band defined in EDS files of
each target.
Node Name Shows a node number and node name.
Connection Name Shows a connection name.
Scheduled Number of
Connected Units
The scheduled number of connected units is displayed.
Input
(T>O)
RPI (ms)
The RPI (communication interval) in the receiving direction of connection
settings is displayed.
COS When "Inpu t Send Trigger" is set to "Change of State", '●' is displayed.
MultiCast When "Connection Type" is set to "Multicast", "●" is displayed.
(pps) Shows the communication volume (pps) per second in the receiving direction.
Output
(O>T)
Scheduled
Connected RPI
(ms)
Shows the RPI (communication interval) in the sending direction set in
"Connection Setting".
(pps) Shows the communication volume (pps) per second in the sending direction.
(4) HUB Switch IGMP Snoop Function
Select make the function "Valid" or "Invalid" when calculating the load factor. When selecting
“Invalid”, “HUB Switch IGMP Snoop Function” is displayed in red.
* If the adapter (target) load factor exceeds 100% when setting the multicast communication,
change the set value of RPI longer or use a HUB that the IGMP snoop function is enabled.