Palm P121VZW, User Manual

Page: 15 / 216

Chapter 2 : Basics 15
10 Replace the battery .
11 To replace the back cover: Insert the ringer switch into the hole
provided for it on the right side of the back cover.
12 Press the back cover and the body of the phone together at each pair
of clasps. You can feel the clasps engage.
Complete setup
1 Press and hold the power button on the upper-left corner of your
phone until you see the Palm ® logo on the screen (approximately five
seconds).
2 Follow the onscreen instructions to complete setup.
3 To create a Palm profile, enter a working email address and select and
answer a security question (see
What is a Palm profile? ).
NOTE If you have a Palm profile from an old webOS phone that you no longer
use, you can enter that profile email address and username to download that
profile information to your new phone. But if you are still using the other phone,
you must create a new Palm profile for your Pixi Plus phone—you can’t use the
same profile on two phones.
4 Your phone is ready to use. To learn how to make your first call, see
Make calls .
Verify your profile
After you finish setup, look for an email on your computer at the address you
used for your Palm profile. If you don’t see the confirmation email in your
Inbox, check your spam mail folder in your desktop email program. Click the
link in the email to do the following:
• Verify your Palm profile.
• Follow a link to learn about getting data like contacts and appointments
onto your phone from your desktop organizer software (see
How do I get
data off my computer? ).
TIP If your phone does not turn on after you insert the battery and press and hold
power , you may need to charge the battery (see Charge the battery ).