020-17467-00 Instructions For Use PadMixer 1000 Premium RevD
35
Figure 41: Manually inflated, fully deployed mixing biocontainer
Note: it is advised to check the operation of the mixing biocontainer detection sensor
manually each time it is used.
5.9 Starting the mixing cycle
Press the
“Start” button and the mixing will start.
5.10 Emptying the mixing biocontainer
After the mixing process is
completed, the mixing biocontainer’s contents may be drained
and the empty mixing biocontainer responsibly disposed of. The following general guidelines
apply, and should be used in conjunction with all safety and environmental regulations
appropriate for the process and location.
To discharge the mixing biocontainer, connect the drain hose to an appropriate receptacle
then open the drain tubing clamp. If fitted, the EZ Drain valve should be opened by pushing
the locking collar upwards until it clicks, then pushing up on the blue BarbLock®* to open the
drain, and pulling the locking collar down again to lock it (Figure 42).
