020-17467-00 Instructions For Use PadMixer 1000 Premium RevD
23
Figure 29: Moving from open to closed (stops fluid flow)
OPTIONAL: Prior to filling with liquid, an inert gas or air may be introduced through one of
the top ports to pre-inflate the mixing biocontainer. Pre-inflation for a contained or sterile
application should be done only via a sterilizing-grade vent filter integral to the mixing
biocontainer.
OPTIONAL: Any sensors (pH, conductivity probe etc.) should be installed before filling the
mixing biocontainer. A temperature pt-100 probe can be installed after since it is not fluid
contact.
5.2 Filling the mixing biocontainer
The biocontainer can now be filled with liquid and/or powder. This can be done with the
mixing tank already under the machine or free-standing (e.g. in a separate room).
