Palfinger PC 3800, Operating Manual

Page: 64 / 158

Ancillary equipment
Remote control
Note!
The wireless remote control system (remote control console,
receiver) complies with the applicable EMV directive. So the unit will
as far as possible not interfere with other systems or get interfered by
them at the place of application.
General
All safety regulations included in the operating instructions of the crane must be observed.
Crane control systems
Safety features serve to protect the operator, so it is not allowed to manipulate or inactivate them.
Guarantee and warranty immediately expire when any manipulations to the radio remote control
system (remote control console and receiver) become obvious.
Components of the remote control
Only original PALFINGER components must be used to operate the remote control system.
Guidelines to prevent dangers
•
Make sure not to actuate any operating elements before starting the remote control console.
•
If dangers occur push the STOP button.
•
Have defective components (remote control console, receiver, accessories) immediately repaired
or replaced at a PALFINGER service partner.
•
Immediately stop crane operation in the event of any malfunctions.
•
Always fully charge the battery.
•
Do not operate any crane functions while attaching and detaching loads.
•
The position of the operator must always be outside the danger zone of the crane.
•
The operator must have full view of the crane movements and the working range.
58