Palfinger PC 3800, Operating Manual, Page: 67 / 158

Chapter 6 Ancillary equipment
1. STOP-button
The emergency-stop button switches the remote control console off and hence stops all crane
functions.
For how to operate it refer to Emergency cut-off button/ push-button (see " Emergency cut-off
button / push-button " Page 41).
2. Function key FN
The FN function key switches the remote control console on and is used to select the crane functions
(levels 1 and 2).
Start remote control console
See also Preparing for remote operation
(Page 69).
1. Press the STOP-button and hold it down.
2. Press the function key FN and let both
buttons go.
The remote control console is switched on.
Note!
The level that is active gets shown on the display.
Changing levels (1/2)
1
2
•
Function key FN is not pressed.
Level 1 is active. Example: counter-clockwise
slewing.
•
Function key FN is pressed.
Level 2 is active. Example: Lift up the stabilizer
cylinder.
3. Buttons for crane functions
The crane functions’ buttons are proportional push-buttons for which double assignment is possible
(levels 1 and 2, see above). The depth of button operation corresponds to the movement speed of the
function that is activated.
4. Status LED
The red LED indicates whether the remote control console is on or off.
LED off: Remote control console is off.
LED on: Remote control console is on.
5. Indicator LED
Indicates the currently active level of the buttons for crane functions.
1. - Level 1
2. - Level 2
61